1/4" Stamp Overlay System

The 1/4" stamp overlay system for patterned stamping is designed using S-1800 Super-Stamp®. The system is applied at 1/4" profiled directly to concrete and then stamped using texture rubber mats with joints. This popular overlay system is designed to create a decorative yet natural appearance over concrete surfaces. The design possibilities are endless, with more than 200 stamp and texturing mats, and a wide variety of colors to choose from or create.

1/4" Stampable Overlay System Application Instructions

1/4" Stampable Overlay System Datasheet

PRODUCTS

CleanerS-12000 HEAVY DUTY DEGREASER™ Learn More »

Super-Krete S-12000 Heavy Duty Degreaser is a fortified multipurpose cleaner formulated to remove deeply penetrated oil, grime, other contaminants and surface residue from concrete. For interior and exterior use, Heavy Duty Degreaser is an alternative to muriatic and other acids...

TreatmentS-1300 PENE-KRETE® Learn More »

A revolutionary product, Super-Krete S-1300 Pene-Krete is a non-hazardous penetrating densifier for use on all concrete and masonry substrates. Pene-Krete reacts with alkali and free lime in common cement and creates an internal crystal-like shield, increasing the strength of new and existing concrete and masonry, and reducing moisture vapor transmission

1/4th" OverlayS-1800 SUPER-STAMP® GRAY (Option 1)Learn More »

S-1800 Super-Stamp® Gray and S-1801 Super-Stamp® White are single-component, cementitious products designed to create the look of natural stone, and any other desirable textures over existing concrete. Super-Stamp is a ready-mixed proprietary blend of a specially modified water-resistant, acrylic co-polymer resin mixed with various sized aggregates formulated to maintain a 1/4" thick profile...

1/4th" OverlayS-1801 SUPER-STAMP® WHITE (Option 2)Learn More »

Release AgentS-1710 LIQUID RELEASE AGENT™ Learn More »

S-1710 Liquid Release Agent is designed to make applying textures to concrete easy and error-free while extending stamping tool life. S-1710 Liquid Release Agent acts as a lubricant and conditioner to keep tools clean.

Clean-UpS-200 SUPER-SCRUB™ Learn More »

Super-Scrub is a non-lotion cleaner used primarily for the removal of Super-Krete S-1710 Liquid Release Agent™ residue from stamped concrete and stampable overlays. Super-Scrub ensures the removal of release agents without creating a film or bond-breaker

Base ColorS-9500 COLOR STAIN™ Learn More »

Super-Krete S-9500 Color Stain achieves a decorative acid stain look without the hazard or special handling. Color Stain is a water-based, penetrating, non-acidic, acrylic/urethane emulsion that creates a natural look on new and existing surfaces. Color Stain is durable and protective

Top CoatS-8350 SUPRA-SEAL™ VOC (Option 1)Learn More »

S-8350 Supra-Seal™ VOC is a clear, solvent-based acrylic designed for sealing conventional concrete, exposed aggregate, porous tile, concrete pavers and a variety of architectural concrete surfaces. S-8350 Supra-Seal is based on a hard acrylic polymer that produces coatings that provide good gloss, stain-resistance and cleanability

Top CoatS-8400 SUPRA-SEAL™ PLUS (Option 2)Learn More »

S-8400 Supra-Seal Plus is a clear, solvent-based acrylic designed for sealing conventional concrete, exposed aggregate, porous tile, concrete pavers and a variety of architectural concrete surfaces. S-8400 Supra-Seal Plus is based on a hard acrylic polymer that produces coatings that provides good gloss, stain-resistance and cleanability

ToolsS-19000 GAUGE RAKE™ W/ CAMS Learn More »

This Gauge Rake is designed to rake out Super-Krete Overlay Materials at 1/4″ (Super-Stamp, Stamp-Kote) or 1/8″ (Bond-Kote) evenly across the surface to be stamped to ensure the proper depth of material is applied. Gauge Rake must be set with the appropriate CAMS for achieving the desired thickness

ToolsS-16000 FLEX SMOOTHER™ Learn More »

Super-Krete Flex Smoother is designed to be used with Super-Krete’s 1/4″ stamp overlay products (Super-Stamp & Stamp-Kote) while standing to smooth the gauge rake lines formed by Super-Krete gauge rake when evenly spreading the stampable material over the surface at 1/4″, the surface is smoothed out, and becomes ready to be stamped

S-12000 Heavy Duty Degreaser Kit Part A SDS 2016

S-12000 Heavy Duty Degreaser Kit Part B SDS 2016

S-12000 Heavy Duty Degreaser SDS 2016

S-12000 Heavy Duty Degreaser™ Product Datasheet

S-1300 Pene-Krete SDS 2016

S-1300 Pene-Krete® Product Datasheet

S-1710 Liquid Release Agent™ Product Datasheet

S-1710 Liquid Release SDS

S-1800 Super-Stamp Gray SDS 2016

S-1800-Super-Stamp® Product Datasheet

S-1801 Super-Stamp White SDS 2016

S-200 Super Scrub SDS