Knockdown Texture System
Provide both beauty and better traction around wet, slippery areas like pools and spas, steps and walkways with the Knockdown Texture System. This coating system is not only decorative; it also creates a cooler walking surface and exceeds typical skid-resistant standards to improve safety while helping reduce liability around high risk areas in commercial and residential environments.
Knockdown Texture Application Instructions
Knockdown Texture System Datasheet
Knockdown Texture System Specification
PRODUCTS
CleanerS-12000 HEAVY DUTY DEGREASER™ Learn More »
Super-Krete S-12000 Heavy Duty Degreaser is a fortified multipurpose cleaner formulated to remove deeply penetrated oil, grime, other contaminants and surface residue from concrete. For interior and exterior use, Heavy Duty Degreaser is an alternative to muriatic and other acids...
TreatmentS-1300 PENE-KRETE® Learn More »
A revolutionary product, Super-Krete S-1300 Pene-Krete is a non-hazardous penetrating densifier for use on all concrete and masonry substrates. Pene-Krete reacts with alkali and free lime in common cement and creates an internal crystal-like shield, increasing the strength of new and existing concrete and masonry, and reducing moisture vapor transmission
Base CoatS-9300 BOND-KOTE® GRAY (Option 1)Learn More »
S-9300 Bond-Kote Gray and S-9302 Bond-Kote White are the ultimate concrete repair, resurfacing and texturing product all-in-one! Bond-Kote virtually eliminates the need to remove and replace old, damaged concrete. It is a ready-mix formula. Just add water! Use Bond-Kote for crack treatments, curb and gutter repair, sidewalk resurfacing, driveway resurfacing and anywhere else there is concrete!
Base CoatS-9302 BOND-KOTE® WHITE (Option 2)Learn More »
S-9300 Bond-Kote Gray and S-9302 Bond-Kote White are the ultimate concrete repair, resurfacing and texturing product all-in-one! Bond-Kote virtually eliminates the need to remove and replace old, damaged concrete. It is a ready-mix formula. Just add water! Use Bond-Kote for crack treatments, curb and gutter repair, sidewalk resurfacing, driveway resurfacing and anywhere else there is concrete!
Spray CoatS-9300 BOND-KOTE® GRAY (Option 1)Learn More »
S-9300 Bond-Kote Gray and S-9302 Bond-Kote White are the ultimate concrete repair, resurfacing and texturing product all-in-one! Bond-Kote virtually eliminates the need to remove and replace old, damaged concrete. It is a ready-mix formula. Just add water! Use Bond-Kote for crack treatments, curb and gutter repair, sidewalk resurfacing, driveway resurfacing and anywhere else there is concrete!
Spray CoatS-9302 BOND-KOTE® WHITE (Option 2)Learn More »
S-9300 Bond-Kote Gray and S-9302 Bond-Kote White are the ultimate concrete repair, resurfacing and texturing product all-in-one! Bond-Kote virtually eliminates the need to remove and replace old, damaged concrete. It is a ready-mix formula. Just add water! Use Bond-Kote for crack treatments, curb and gutter repair, sidewalk resurfacing, driveway resurfacing and anywhere else there is concrete!
Base ColorS-9500 COLOR STAIN™ Learn More »
Super-Krete S-9500 Color Stain achieves a decorative acid stain look without the hazard or special handling. Color Stain is a water-based, penetrating, non-acidic, acrylic/urethane emulsion that creates a natural look on new and existing surfaces. Color Stain is durable and protective
Final ColorS-9500 COLOR STAIN™ Learn More »
Super-Krete S-9500 Color Stain achieves a decorative acid stain look without the hazard or special handling. Color Stain is a water-based, penetrating, non-acidic, acrylic/urethane emulsion that creates a natural look on new and existing surfaces. Color Stain is durable and protective
Top CoatS-8350 SUPRA-SEAL™ VOC (Option 1)Learn More »
S-8350 Supra-Seal™ VOC is a clear, solvent-based acrylic designed for sealing conventional concrete, exposed aggregate, porous tile, concrete pavers and a variety of architectural concrete surfaces. S-8350 Supra-Seal is based on a hard acrylic polymer that produces coatings that provide good gloss, stain-resistance and cleanability
Top CoatS-8400 SUPRA-SEAL™ PLUS (Option 2)Learn More »
S-8400 Supra-Seal Plus is a clear, solvent-based acrylic designed for sealing conventional concrete, exposed aggregate, porous tile, concrete pavers and a variety of architectural concrete surfaces. S-8400 Supra-Seal Plus is based on a hard acrylic polymer that produces coatings that provides good gloss, stain-resistance and cleanability
S-12000 Heavy Duty Degreaser Kit Part A SDS 2016
S-12000 Heavy Duty Degreaser Kit Part B SDS 2016
S-12000 Heavy Duty Degreaser SDS 2016
S-12000 Heavy Duty Degreaser™ Product Datasheet
S-8350 Supra-Seal™ SDS
S-8350 Supra-Seal™ VOC Product Datasheet
S-8400 Supra-Seal™ Plus Product Datasheet
S-8400 Supra-Seal™ Plus SDS
S-9300 Bond-Kote Gray SDS 2016
S-9300 Bond-Kote® Product Datasheet
S-9302 Bond-Kote White SDS 2016
S-9500 Color Stain™ Color Chart
S-9500 Color Stain™ Pigment Pack_SDS
S-9500 Color Stain™ Product Datasheet
