Download the Super-Krete Decorative Systems Catalog by clicking the Brochure in the panel on the left side of this page.

The S-9500 Stain and Seal System is designed for use as a decorative flooring system for heavily used walking and vehicle traffic. Used primarily for industrial, commerical and residential floors such as but not limited to exterior drives, walkways, entrances, porte chacheres, retail stores, restaurants, etc. and anywhere an easily cleanable, petroleum and chemical resistant finish is required. This system is extremeley versatile and is available in a wide variety of colors and custom colors are available. Super-Grit(TM) skid-resistant additive may be added to sealer appliation for additional skid-resistance.

S-120 Color-Bond System

The Super-Krete S-120 Color-Bond (Integrally Colored) Decorative Overlayment System is designed to provide various decorative finishes over existing structurally sound concrete substrates. Applications vary from spray textures, 1/8 and 1/4 stamped overlays, squeegee applications, vertical and overhead trowel finises, concrete repair and general resurfacing.. Availablie in 20 standard colors plus clear for custom tinting. For use in residential, commercial and industrial appiications.

S-1050 1/8-Inch Stampable Overlay System (for Seamless Textures)

Super-Krete System S-1050, 1/8-Inch Stamp Overlay System for seamless textures is a stampable overlay using Super-Krete Bond-Kote to be textured at a thin 1/8-inch profile right over properly prepared concrete.

S-9000 Smooth Surfaces & Art Deco Finishes

A smooth art deco finish may be achieved when coating over existing concrete substrates. This application is typical when creating an art deco floor or countertop and is extremeley popular in restaurants, cafes, day spas and salons, and other interior areas. This system is also used to create decorative concrete countertops, outdoor barbecues, sinks, counters, showers, hearths and fireplaces.

S-1801 1/4-Inch Stampable Overlay System (for Patterned Stamping)

The S-1801 1/4-Inch Stamp Overlay System for patterned stamping is designed for Super-Stamp to be applied at 1/4-inch profile and then stamped using texture rubber mats with joints. This is a single-component system.

Stampable Overlays - General

Super-Krete Stamp Overlay Systems open up a whole new world of possibilities for designers. Our systems create a durable 1/8 or overlayment for concrete than can strengthen, stabilize, brighten and beautify tired, worn, damaged or new concrete. It is the perfect alternative to costly new concrete installation and concrete removal and replacement. Imagine a private garden stone pathway or rustic flagstone foyer. Create an Old European atmosphere with the look of timeworn cobblestone. Or imagine the sleek looks of modern slate of brick patterns or your feet. Remarkably versatile, Super-Krete Stamp Overlayment Systems can achieve practically any appearance. The results are limited only by your imagination.

S-5000 Paint Chip Industrial Floor System

Super-Krete Paint Chip Industrial Floor System is designed to achieve a decorative finish for industrial areas such as garage floors, kitchens, warehouses and laundries.

S-9401 Knockdown Texture System

Knockdown texturing is the way to beautify existing concrete surfaces around high liability areas such as commercial pool decks. This Super-Krete coatings system is not only decorative - it creates a cooler walking surface and exceeds ASTM co-efficient of friction requirements for skid-resistance. This system has also passed ICBO testing requirements for a Class A Fire Rating.