Broom Finish System
Excellent for repairing sidewalks, curbs, and gutters, S-9300 Bond-Kote® makes worn concrete look new again – and makes it even tougher. The Broom Finish System provide an economical alternative to the removal and replacement of existing concrete. This system creates a flexible and durable finish that can be used to re-level, renovate, resurface and create decorative patterns and designs. When properly sealed, the new finish will resist gas, oils, water, salts, freeze thaw cycles, and ultraviolet rays. For dramatic color and style, add S-11000 Ure-Kote™ paint or S-9500 Color Stain™.
For improved aesthetics and durable repairs without demolition and replacement, simply level out the surface by applying two coats of S-9300 Bond-Kote creating a nominal thickness of 1/32″ to 1/8″ over existing concrete and add a basic skid-resistant broom texture. The finish can be light or coarse depending on the broom bristles used. Drawing the broom across the surface in unique patterns can create more ornate designs.
Broom Finish System Datasheet
Broom Finish System Specifications
OverlayS-9300 BOND-KOTE® GRAY (Option 1)Learn More »
S-9300 Bond-Kote Gray and S-9302 Bond-Kote White are the ultimate concrete repair, resurfacing and texturing product all-in-one! Bond-Kote virtually eliminates the need to remove and replace old, damaged concrete. It is a ready-mix formula. Just add water! Use Bond-Kote for crack treatments, curb and gutter repair, sidewalk resurfacing, driveway resurfacing and anywhere else there is concrete!
OverlayS-9306 MICRO-BOND™ WHITE (Option 2)Learn More »
S-9304 Micro-Bond Gray and S-9306 Micro-Bond White are made especially for micro-topping. This cementitious product contains extremely fine sands to create a smoother finish. Micro-Bond is the smart solution for repairing and resurfacing concrete interior floors, countertops, and decorative art surfaces
ColorantS-9500 COLOR STAIN™ Learn More »
Super-Krete S-9500 Color Stain achieves a decorative acid stain look without the hazard or special handling. Color Stain is a water-based, penetrating, non-acidic, acrylic/urethane emulsion that creates a natural look on new and existing surfaces. Color Stain is durable and protective
SealerS-8350 SUPRA-SEAL™ VOC (Option 1)Learn More »
S-8350 Supra-Seal™ VOC is a clear, solvent-based acrylic designed for sealing conventional concrete, exposed aggregate, porous tile, concrete pavers and a variety of architectural concrete surfaces. S-8350 Supra-Seal is based on a hard acrylic polymer that produces coatings that provide good gloss, stain-resistance and cleanability
SealerSK-P100 Learn More »
SK-P100 is a two component, high solids aliphatic polyurethane. This product offers a remarkable combination of performance properties not found in other polymer coatings. SK-P100 produces protective films which are hard, flexible and very impact resistant
- ›› broom finish system
- ›› concrete resurfacing system